Lately I have wanted to do more work with colored pencils on
fabric. A couple of weeks ago I posted
my blog on the Japanese Doll Festival and that sparked me to make a doll. So I combined the two urges and made a little
pocket doll with colored pencils.
A pocket doll is simply a doll small enough to fit in a
pocket. I decided to make my little doll
based on a cookie cutter I received as a child.
It had the design for the ‘cookie’ on the top of it and that is what my
doll would look like. (You might notice
it is a pretty thick cookie cutter.
There was actually soap shaped like the cutter in it when I received it
as a child.). The cutter is about 2 ½
inches wide and 4 ½ inches tall.
Supplies needed
-- white or cream or off white cotton fabric. You will want it at least 2 inches bigger
than the dolls shape
--a piece of freezer paper the same size as the cut fabric. Freezer paper can be found in some groceries
in the wax paper/aluminum foil aisle. This helps stabilize your fabric so it
doesn’t stretch or move when coloring it.
You can use a light weight iron on fabric stabilizer if you want. You will remove the freezer paper when you
are done.
--colored pencils – any brand will work. The more expensive
brands might have a darker pigment.
-- textile medium A textile medium is a liquid put on a
painting that makes the painting permanent so if you wash it, the pigment will
not come off or fade. Often times it was
put on oil or acrylic paintings so they would not fade if exposed to
sunlight. It is a little thicker than
water and you brush it on the coloring and let it dry. This is more likely
found in an art supply store or a craft store near the paint supplies or glues.
-- brushes to apply the textile medium and small container
to hold a small amount of textile medium
-- backing fabric for the doll. It needs to be bigger than the doll design at
least by 1/4 inch for a seam allowance.
-- fiber fill to stuff the doll
-- needle and thread.
You can if you want to use your machine but something this small I
usually do it by hand.
I started with white cotton fabric. I cut it to 4 by 6 inches for fit the cookie
cutter design. I cut a piece of freezer
paper the same size and ironed it shiny side down onto the back of the white
fabric. As I mentioned above this
stablizes the fabric so it doesn’t move around when I am coloring the fabric.
With this next part I
wanted to try something different. I
wanted the design to be free handed. I
didn’t want the entire design to be trace from some other source. I just traced the shape around the cookie
cutter. Since I didn’t want any tracing
lines, I used a flesh tone pencil. Much
of the outer edges were going to be arms and legs. Where the hair and dress would be, I was
going to use a dark pencil so it would cover the flesh colored pencil marks.
Now the fun part – coloring. When I color I first go one direction with
my pencil over the space I am coloring and then I go over that color, with the
same pencil, in the opposite direction.
So with the hair, I used brown going right and left and once that area
was totally brown, I then went up and down.
I think it gives it a more even coloring. You still see the pencil marks but not as
prominently.
Once I am done coloring, I leave the freezer paper on the
fabric and cover the entire piece with the textile medium. I start off with only a teaspoon of medium
and if I need more I will add it as needed.
Don’t worry that the medium is white coming out of the bottle, once it
is spread on the fabric, it turns clear.
Let it dry and then peel the freezer paper off. I should mention that
the dried textie medium does make the fabric feel still but the advantage of
the medium is the colored pencil will remain permanent on the fabric.
To make the doll, I usually measure about ¼ inch from the
edge of the figure and cut away the excess.
This ¼ inch area is your seam allowance. I am going to sew right along
the edge of the colored line.
But when I went to
sew on the wrong side, I had a hard time see the color on the back. So I taped it to my light box and trace in
pencil the edge of the coloring. If you
don’t have a light box, tape the doll to a brightly lit window, it works the
same way.
Once you have the doll cut out, you now have to cut out the
backing fabric. You could trace the
cookie cutter again and color the back of the doll. I like with my little dolls to sometime have
other fabric to back the doll. I have
this set of woven fabrics that had just the purple I needed to match the dress.
I pinned the doll to the backing fabric (right sides
together) and then cut around the doll.
What was left was to sew along the trace line. Make sure you leave a little opening to turn
the doll right side out and clip the seams so all the curved seams are smooth
(Don’t clip the sewing or the doll will come apart. Take it from someone who knows.). Stuff the little doll, sew up the opening and
you have yourself a doll.
© 2021 – Cheryl Fillion
